04 May 22:
We continued work on the Super Bench, cut out the 3/4 inch plywood for the bench top.
Tip: You can cut ground level by placing a scrap of foamboard under the plywood. It's soft to kneel on as well.
A Gorilla Cart makes a handy mobile workshop.
We headed to the trees to find shade and cooler temps. Off in the woods Skipper is Skippervising.
A little 4x4 folding card table makes a nice portable workbench.
Clamps are used to hold apron pieces while screws are being driven.
We name our clamps after friends and family, so it feels like they are there helping.
2nd module frame finished.
Table top screwed down to the frame with deck screws.
3rd frame installed.
We checked each module for level.
No comments:
Post a Comment